Categories
Brands
Search
Search
- No mains supply ; only 2 batteries of 1,5 volts located in the housing to the right of the control board
- A frame to hold the patient in the shape of walking frame
- Average height : 80 cm from the tray
- Adjustable from + or – 10 cm depending on the patient’s height
- Width (m) : 0,74 p Depth (m) : 0,70
- Average height (m) : 1,05 p Weight (kg) : 25
- Maximum user’s weight (kg): 110
Electronics
- A wide, low, easy-access, oscillating tray located at least 10 cm from the floor
- Amplitude of oscillations : + or – 3 cm
- Side, to-and-fro or overall oscillations
- Adjustment of the tray mobility:
- A central handle to adjust the hardness
- Increase by turning clockwise
- Reduction by turning anti-clockwise
- Selection system for the direction of tray oscillations:
- Sideways (right, left) by raising the adjustment handle located under the luminous point
- To-and-fro (forwards, backwards) by raising the adjustment handle to the right
- Overall by putting both handles in OFF position
This height-adjustable verticalisation treatment table has two motors. One motor ensures effortless and smooth tilting; the other adjusts height and helps you transfer your patient. The Tilting Advanced is the ideal standing aid for neuromotor revalidation and adaptation exercises from lying to standing. Another area where it can be used is general orthostatic examination; more specifically, the examination and treatment of vasovagal syncope.
- Motors are operated by hand switch
- Footrests can be set individually and can be folded down completely
- Large, lockable casters guarantee the best possible mobile use
- Fitted with a tilt angle indicator
- Patient hoist compatible (14 cm clearance below frame)
- Optional: battery power and separate leg fixation
- Height adjustment and tilting by electric motors
- Both motors operated by hand switch
- Footrests can be set individually and can be folded down completely
- Large casters (lockable) guarantee the best possible mobile use
- Fitted with a tilt angle indicator
- Patient hoist compatible, 14 cm clearance below chassis
- Optional: battery power and separate leg fixation
- Gymna Stability Profile (GSP)
- Cushions with 40 mm padding
- Cushions in a choice of 11 colours
The powerful Thermo 500 transmits a pulsed, high frequency electrotherapy signal, with a maximum of no less than 70 Watts (1 channel) or 40 Watts per electrode (2 channels).
Athermal and thermal therapy
Pulsed Short-wave therapy is applied specifically in an athermal way for acute conditions, inflammations, post-traumatic and post surgical injuries. By setting high pulse repetition frequencies and long pulses you will obtain an excellent thermal effect for the treatment of chronic conditions.
Intelligent control system (ICS)
Equipped with an intelligent control system (ICS) that monitors the energy to the patient immediately, the Thermo 500 increases the efficiency of your treatment.
Main features of the Thermo 500:
- Compact
- Athermal and thermal therapy
- Very high effective and average output
- 38 scientifically proven indications
- 50 free memory addresses for personal programmes
- Standard mode for simple and quick start
- Simple and clear to operate
- Special thermoplodes for optimal deep effect
- 2 independent channels
- Contact control for optimising treatment
All units are supplied with the following:
- Electrode-arm
- Thermoplode - ø 140mm
- Cable for Thermoplode
- Safe working load and lifting capacity of 240Kg
- Integral rolling top design to provide effective application of traction forces
- Adjustable height mount for traction machine with offset positioning for changing angle of traction application
- Adjustable angle backrest from horizontal to +80°
- Adjustable angle head/foot section from -25° to +75°
- Head section includes breathing hole and plug
- Power assisted backrest and foot sections incorporate anti-trap design
- Choice of hydraulic or electric height elevation
- Excellent height range from 50cm to 101cm
- Retractable wheel design with adjustable foot for stability on uneven surfaces
- Fixation point for optional cervical traction accessory
- Purpose made precision bearings on all pivot points
- Hand switch fitted as standard on electric models
- Standard width 70cm upholstery
ST6567 Electric traction table with machine mount
ST6557 Hydraulic traction table with machine mount
ST6567P Electric traction package
ST6557P Hydraulic traction package
• Safe working load and lifting capacity of 225Kg (Child - 200Kg)
• Large wheel design, with central locking and steering facility on standard and deluxe models
• Individual braking castors on economy models
• Electric height and tilting operation with hand switch control
• Adjustable angle dual foot boards +15˚ to -30˚ (4 Positions)
• Height range of 47cm to 101cm
• Tilting angle from horizontal to +90˚
• Lowers to wheelchair height for ease of patient transfer
• Tilt angle inclinometer fitted as standard
• Purpose made precision bearings on all pivot points
• Clearance beneath frame for mobile hoist
• Supplied with patient handgrips and set of harnesses
• Worktable supplied with standard and deluxe models - optional with economy and child models
ST7640 Economy tilt table with Independently Locking Castors
ST7641 Standard tilt table with Central Locking Castors

ST7640DL Economy tilt table (Divided leg) with Independently Locking Castors
ST7641DL Standard tilt table (Divided leg) with Central Locking Castors

ST7647 Deluxe tilt table with backrest and Central Locking Castors

ST7647DL Deluxe tilt table with backrest (Divided leg) and Central Locking Castors

ST7650 Child / Paediatric tilt table with Independently Locking Castors
ST7651 Child / Paediatric tilt table with Central Locking Castors

- Safe working load and lifting capacity of 250Kg
- Choice of widths available 105cm, 125cm or 150cm
- Choice of manual or electric height elevation on 105cm and 125cm models
- Excellent electric height range from 46cm to 100cm
- Retractable wheel design and adjustable foot for stability on uneven floors
- Purpose made precision bearings on all pivot points
- Clearance beneath frame for mobile hoist
- Hand switch fitted as standard
ST5551 Hydraulic width 105cm
ST5561 Electric width 105cm

ST5551W Hydraulic width 125cm
ST5561W Electric width 125cm

ST5561L Electric width 150cm

• Safe working load and lifting capacity of 240kg
• Choice of Electric or Hydraulic height elevation
• Excellent height range from 41cm to 94cm
• Choice of Retractable wheel design or Central Locking Wheel Design
• Choice of three different sizes - Small (130cm), Medium (152cm) and Large (186cm)
• Purpose made precision bearings on all pivot points
• Clearance beneath frame for mobile hoist
• Hand switch fitted as standard on electric models
• 65cm Wide Upholstery as standard
Large (186cm) Models
ST1551A Hydraulic with retractable wheels
ST1561A Electric with retractable wheels
ST1651A Hydraulic with central locking castors
ST1661A Electric with central locking castors

Medium (152cm) Models
ST1551B Hydraulic with retractable wheels
ST1561B Electric with retractable wheels
ST1651B Hydraulic with central locking castors
ST1661B Electric with central locking castors

Small (130cm) Models
ST1551C Hydraulic with retractable wheels
ST1561C Electric with retractable wheels
ST1651C Hydraulic with central locking castors
ST1661C Hydraulic with central locking castors

The fixed height therapy couch features an extremely strong and rigid design, providing maximum patient comfort throughout all treatment with a safe working load of 240Kg.
The couch has a fully adjustable backrest, that raises from horizontal to +75˚ with gas strut operation.
A paper roll holder, breathing hole and plug for prone treatments, are all available at an additional cost.
There is an adjustable foot for added stability on one of the couch legs.
The couch is supplied flat packed to reduce shipping and delivery costs.
ST2700 2 Section Fixed Height Couch - No Storage
ST2701D 2 Section Fixed Height Couch - 1 Drawer
ST2702D 2 Section Fixed Height Couch - 2 Drawers

- Safe working load and lifting capacity of 240Kg
- Electric drainage facility to +25˚ between mid section and backrest
- Electric height operation via integral perimeter foot switch
- Excellent height range from 46cm to 99cm
- Adjustable angle backrest from horizontal to +90˚
- Adjustable head section with positive and negative angle
- Power assisted backrest and head sections incorporate anti-trap design
- Choice of standard, basic or plus head design with adjustable armrests
- Choice of standard or split leg foot section
- Breathing hole and plug fitted as standard
- Retractable wheel design with adjustable foot for stability on uneven surfaces
- Purpose made precision bearings on all pivot points
- Standard width 65cm upholstery
ST3547 Standard head design
ST3547S Standard head design with split leg

ST3548 Basic head design
ST3548S Basic head design with split leg

ST3549 Plus head design
ST3549S Plus head design with split leg

- Safe working load and lifting capacity of 240Kg
- Electric height operation via integral perimeter foot switch
- Excellent height range from 46cm to 99cm
- Adjustable angle backrest from horizontal to +90˚
- Adjustable head section with positive and negative angle
- Power assisted backrest and head sections incorporate anti-trap design
- Choice of standard, basic or plus head design with adjustable armrests
- Choice of standard or split leg foot section
- Breathing hole and plug fitted as standard
- Retractable wheel design with adjustable foot for stability on uneven surfaces
- Purpose made precision bearings on all pivot points
- Standard width 65cm upholstery
ST3347 Standard head design
ST3347S Standard head design with split leg

ST3348 Basic head design
ST3348S Basic head design with split leg

ST3349 Plus head design
ST3349S Plus head design with split leg

- Safe working load and lifting capacity of 325Kg
- Electric height operation
- Electric backrest operation to +75˚
- Large central locking castors with steering control
- Excellent height range from 46cm to 100cm
- Purpose made precision bearings on all pivot points
- Clearance beneath frame for mobile hoist
- Dual hand switch fitted as standard
ST4642 Electric with electric backrest 105cm

ST4642W Electric with electric backrest 125cm

- Safe working load and lifting capacity of 250Kg
- Backrest angle adjustment from horizontal to +75°
- Choice of manual or electric height elevation
- Excellent height range from 46cm to 100cm
- Retractable wheel design with adjustable foot for stability on uneven floors and surfaces
- Purpose made precision bearings on all pivot points
- Clearance beneath frame for mobile hoist
- Hand switch fitted as standard on electric models
- Choice of widths available - 105cm or 125cm
ST4552 Hydraulic with manual backrest 105cm
ST4562 Electric with manual backrest 105cm
ST4542 Electric with electric backrest 105cm

ST4552W Hydraulic with manual backrest 125cm
ST4562W Electric with manual backrest 125cm
ST4542W Electric with electric backrest 125cm

• Safe working load and lifting capacity of 325kg
• Backrest angle adjustment from horizontal to +75°
• Footrest angle adjustment from -20° to +75°
• Electric height elevation
• Excellent height range from 45cm to 98cm
• Retractable wheel design with adjustable foot for stability on uneven floors and surfaces
• Purpose made precision bearings on all pivot points
• Clearance beneath frame for mobile hoist
• Hand switch fitted as standard
• Extra-width 80cm Upholstery as standard
ST3573 Electric with electric backrest and head/foot section. Retractable wheels
ST3673 Electric with electric backrest and head/foot section. Large central locking castors with steering facility

• Safe working load and lifting capacity of 325kg
• Backrest angle adjustment from horizontal to +75°
• Electric height elevation
• Excellent height range from 45cm to 98cm
• Retractable wheel design with adjustable foot for stability on uneven floors and surfaces
• Purpose made precision bearings on all pivot points
• Clearance beneath frame for mobile hoist
• Hand switch fitted as standard
• Extra-width 80cm Upholstery as standard
ST2573 Electric with electric backrest. Retractable wheels
ST2673 Electric with electric backrest. Large central locking castors with steering

- Safe working load and lifting capacity of 240Kg
- Adjustable angle backrest from horizontal to +90
- Adjustable angle head section from +10˚ to -90˚
- Choice of hydraulic or electric height elevation
- Excellent height range from 48cm to 101cm
- Retractable wheel design with adjustable foot for stability on uneven surfaces
- Breathing hole and plug included as standard
- Purpose made precision bearings on all pivot points
- Clearance beneath frame for mobile hoist
- Hand switch fitted as standard on electric models
- Standard width 65cm upholstery
ST3556 Hydraulic with manual backrest
ST3566 Electric with manual backrest

Features
- Safe working load and lifting capacity of 240Kg
- Power assisted head section is adjustable from -25˚ to +75˚
- Power assisted backrest adjustable from horizontal to 80˚
- Head section and backrest incorporate anti-trap design
- Choice of hydraulic or electric height elevation
- Excellent height range from 45cm to 98cm
- Retractable wheel design with adjustable foot for stability on uneven surfaces
- Breathing hole and plug included as standard
- Purpose made precision bearings on all pivot points
- Clearance beneath frame for mobile hoist
- Hand switch fitted as standard on electric models
- Standard width 65cm upholstery
ST3557 Hydraulic with manual backrest and head section
ST3567 Electric with electric backrest and head section

ST3558 Hydraulic with manual backrest and head section
ST3568 Electric with electric backrest and head section

ST3559 Hydraulic with manual backrest and head section
ST3569 Electric with electric backrest and head section

Features
• Safe working load and lifting capacity of 240Kg
• The power assisted backrest section incorporates anti-trap design gas strut
• Backrest angle adjustment from -25˚ to +75˚
• Choice of hydraulic or electric height elevation
• Excellent height range from 45cm to 98cm
• Retractable wheel design with adjustable foot for stability on uneven surfaces
• Breathing hole and plug included as standard
• Purpose made precision bearings on all pivot points
• Clearance beneath frame for mobile hoist
• Hand switch fitted as standard on electric models
• Standard upholstery width of 65cm
ST2557 Standard Head, Hydraulic with manual backrest
ST2567 Standard Head, Electric with manual backrest

ST2558 Basic Head, Hydraulic with manual backrest
ST2568 Basic Head, Electric with manual backrest

ST2559 Plus Head, Hydraulic with manual backrest
ST2569 Plus Head, Electric with manual backrest
