Categories
Brands
Search
Search
Description
N.B. All sizes given are based on the product being unstretched.
Tubigrip provides tissue support in the treatment of strains and sprains, soft tissue injuries, joint effusions, general oedema, post-burn scarring and ribcage injuries and is also used for pressure dressings and arm fixation. Tubigrip is made from cotton with covered elastic threads laid into the fabric to form free-moving spirals.
Tubigrip provides lasting, effective support with complete freedom of movement for the patient. Once the bandage has been applied, covered elastic threads within the fabric move to adjust to the contours of the body and distribute pressure evenly over the surface.
Product Features & Benefits:
- Provides comfortable, effective tissue support
- Easy to apply, remove and reapply.
- Full range of sizes to suit any application
- No pins or tapes needed
- Washable (without loss of effectiveness)
- 10m Roll.
- Contains Latex.
How to Apply:
- Cut Tubigrip twice the length required for the limb, allowing an extra 2 – 3cm for overlap.
- Pull Tubigrip onto limb like a stocking.
- Double the Tubigrip back over the limb. Ensure the upper edge is taken 2 – 3cm higher up the limb than the first.
Size Guidance:
Size A – Infant Foot or Arm (Approx. 4cm width unstretched).
Size B - Small Hand or Arm (Approx. 6cm width unstretched).
Size C - Medium Arm/Small Ankle (Approx. 7cm width unstretched).
Size D - Large Arm/Medium Ankle/Small Knees (Approx. 8cm width unstretched).
Size E - Large Ankle/Medium Knee/Small Thigh (Approx. 9cm width unstretched).
Size F - Large Knee/Medium Thigh (Approx. 10cm width unstretched).
Size G - Large Thigh (Approx. 11cm width unstretched).
Pack Size: 10m Roll.
A stable and functional 3-section treatment couch. The Trioplus Luxe is suited for sitting and lying positions, for lumbar flexion, Trendelenburg, manual traction, and much more. Like all Gymna treatment couches, The Trioplus Luxe guarantees years of problem-free support for your manipulations.
- Extra comfortable due to the Gymna cushion heating
- Luxuriously finished cushions with high density foam
- 3-section support surface, suitable for most basic positions
- Adjustable middle section for the best possible position of the spinal column in flexion
Standard features
- Three-section table with adjustable head-, middle-, and leg section.
- Gymna cushion heating with 2 temperature settings with hand control.
- Ergomax Face Support for optimum patient comfort while lying in prone position (one supplied as standard).
- All sections gas spring supported.
- Electrical height adjustment, operated by peripheral foot switch from all 4 sides of the table.
- Gymna Stability Profile (GSP).
- Cushions with duo-padding, with a highdensity lower layer.
- The Luxe cushions are finished with tough saddle stitching.
- Central wheel-lifting mechanism with 4 casters.
- Non slip feet.
- Cushions in a choice of 11 colours.
- Prepared for hip traction support.
- Prepared for shoulder traction supports.
The Trioplus Advanced is stable and functional 3-section treatment couch. It is also very versatile when sitting or lying, for lumbar flexion, Trendelenburg, manual traction, and much more.
This treatment couch guarantees years of problem-free support for your manipulations.
- 3-section support surface, suitable for most basic positions
- Adjustable middle section for the best possible position of the spinal column in flexion
- The head rest can be adjusted to a 30 degree angle and down until it is almost completely out of the way
- The leg section is also suitable for use as a back support
Standard features
- Three-section couch with adjustable head-, middle-, and leg section
- All sections gas spring supported
- Electric or hydraulic height adjustment
- Gymna Stability Profile (GSP)
- Cushions with 40 mm padding
- Breathing hole in head section, incl. cushion
- Central wheel-lifting mechanism with 4 casters
- Non slip feet
- Cushions in a choice of 11 colours
- Prepared for hip traction support
- Prepared for shoulder traction supports
The standard treatment couch for physiotherapy, the Trioflex Luxe offers the same functionality as the Trioplus and is additional equipped with armrests. These are adjustable and provide your patient a comfortable prone position, with the best possible relaxation of the shoulder and neck muscles. The armrests can be removed to create more space under the head section, which is useful for cervico-cranial treatments.
- Extra comfortable due to the Gymna cushion heating
- Luxuriously finished cushions with high density foam
- 3-section support surface, suitable for most basic positions
- Adjustable middle section for the best possible position of the spinal column in flexion
- Equipped with armrests
Standard features
- Three-section table with adjustable head-, middle-, and leg section.
- Gymna cushion heating with 2 temperature settings and hand control.
- Ergomax Face Support for optimum patient comfort while lying in prone position (one supplied as standard).
- All sections gas spring supported.
- Arm supports in the head section.
- Electrical height adjustment, operated by peripheral foot switch from all 4 sides of the table.
- Gymna Stability Profile (GSP).
- Cushions with duo-padding, with a highdensity lower layer.
- The Luxe cushions are finished with tough saddle stitching.
- Central wheel-lifting mechanism with 4 casters.
- Non slip feet.
- Cushions in a choice of 11 colours.
- Prepared for hip traction support.
- Prepared for shoulder traction supports.
The standard treatment couch for physiotherapy! The Trioflex Advanced offers the same functionality as the Trioplus, but is also equipped with additional armrests.
This treatment couch thereby provides the best possible relaxation of the shoulder and neck muscles and a comfortable prone position. The armrests can also be removed to create more space under the head section, which is useful for cervico-cranial treatments.
- 3-section support surface, suitable for most basic positions
- Adjustable middle section for the best possible position of the spinal column in flexion
- The head rest can be adjusted up to a 30 degree angle, and almost completely down
- The leg section can also be used as a back support
- Equipped with armrests
- Three-section couch with adjustable head-, middle-, and leg section
- All sections gas spring supported
- Arm supports in the head section
- Electric or hydraulic height adjustment
- Gymna Stability Profile (GSP)
- Cushions with 40 mm padding
- Breathing hole in head section, incl. cushion
- Central wheel-lifting mechanism with 4 casters
- Non slip feet
- Cushions in a choice of 11 colours
- Prepared for hip traction support
- Prepared for shoulder traction supports
- No mains supply ; only 2 batteries of 1,5 volts located in the housing to the right of the control board
- A frame to hold the patient in the shape of walking frame
- Average height : 80 cm from the tray
- Adjustable from + or – 10 cm depending on the patient’s height
- Width (m) : 0,74 p Depth (m) : 0,70
- Average height (m) : 1,05 p Weight (kg) : 25
- Maximum user’s weight (kg): 110
Electronics
- A wide, low, easy-access, oscillating tray located at least 10 cm from the floor
- Amplitude of oscillations : + or – 3 cm
- Side, to-and-fro or overall oscillations
- Adjustment of the tray mobility:
- A central handle to adjust the hardness
- Increase by turning clockwise
- Reduction by turning anti-clockwise
- Selection system for the direction of tray oscillations:
- Sideways (right, left) by raising the adjustment handle located under the luminous point
- To-and-fro (forwards, backwards) by raising the adjustment handle to the right
- Overall by putting both handles in OFF position
This height-adjustable verticalisation treatment table has two motors. One motor ensures effortless and smooth tilting; the other adjusts height and helps you transfer your patient. The Tilting Advanced is the ideal standing aid for neuromotor revalidation and adaptation exercises from lying to standing. Another area where it can be used is general orthostatic examination; more specifically, the examination and treatment of vasovagal syncope.
- Motors are operated by hand switch
- Footrests can be set individually and can be folded down completely
- Large, lockable casters guarantee the best possible mobile use
- Fitted with a tilt angle indicator
- Patient hoist compatible (14 cm clearance below frame)
- Optional: battery power and separate leg fixation
- Height adjustment and tilting by electric motors
- Both motors operated by hand switch
- Footrests can be set individually and can be folded down completely
- Large casters (lockable) guarantee the best possible mobile use
- Fitted with a tilt angle indicator
- Patient hoist compatible, 14 cm clearance below chassis
- Optional: battery power and separate leg fixation
- Gymna Stability Profile (GSP)
- Cushions with 40 mm padding
- Cushions in a choice of 11 colours
The powerful Thermo 500 transmits a pulsed, high frequency electrotherapy signal, with a maximum of no less than 70 Watts (1 channel) or 40 Watts per electrode (2 channels).
Athermal and thermal therapy
Pulsed Short-wave therapy is applied specifically in an athermal way for acute conditions, inflammations, post-traumatic and post surgical injuries. By setting high pulse repetition frequencies and long pulses you will obtain an excellent thermal effect for the treatment of chronic conditions.
Intelligent control system (ICS)
Equipped with an intelligent control system (ICS) that monitors the energy to the patient immediately, the Thermo 500 increases the efficiency of your treatment.
Main features of the Thermo 500:
- Compact
- Athermal and thermal therapy
- Very high effective and average output
- 38 scientifically proven indications
- 50 free memory addresses for personal programmes
- Standard mode for simple and quick start
- Simple and clear to operate
- Special thermoplodes for optimal deep effect
- 2 independent channels
- Contact control for optimising treatment
All units are supplied with the following:
- Electrode-arm
- Thermoplode - ø 140mm
- Cable for Thermoplode
- Safe working load and lifting capacity of 240Kg
- Integral rolling top design to provide effective application of traction forces
- Adjustable height mount for traction machine with offset positioning for changing angle of traction application
- Adjustable angle backrest from horizontal to +80°
- Adjustable angle head/foot section from -25° to +75°
- Head section includes breathing hole and plug
- Power assisted backrest and foot sections incorporate anti-trap design
- Choice of hydraulic or electric height elevation
- Excellent height range from 50cm to 101cm
- Retractable wheel design with adjustable foot for stability on uneven surfaces
- Fixation point for optional cervical traction accessory
- Purpose made precision bearings on all pivot points
- Hand switch fitted as standard on electric models
- Standard width 70cm upholstery
ST6567 Electric traction table with machine mount
ST6557 Hydraulic traction table with machine mount
ST6567P Electric traction package
ST6557P Hydraulic traction package
• Safe working load and lifting capacity of 225Kg (Child - 200Kg)
• Large wheel design, with central locking and steering facility on standard and deluxe models
• Individual braking castors on economy models
• Electric height and tilting operation with hand switch control
• Adjustable angle dual foot boards +15˚ to -30˚ (4 Positions)
• Height range of 47cm to 101cm
• Tilting angle from horizontal to +90˚
• Lowers to wheelchair height for ease of patient transfer
• Tilt angle inclinometer fitted as standard
• Purpose made precision bearings on all pivot points
• Clearance beneath frame for mobile hoist
• Supplied with patient handgrips and set of harnesses
• Worktable supplied with standard and deluxe models - optional with economy and child models
ST7640 Economy tilt table with Independently Locking Castors
ST7641 Standard tilt table with Central Locking Castors

ST7640DL Economy tilt table (Divided leg) with Independently Locking Castors
ST7641DL Standard tilt table (Divided leg) with Central Locking Castors

ST7647 Deluxe tilt table with backrest and Central Locking Castors

ST7647DL Deluxe tilt table with backrest (Divided leg) and Central Locking Castors

ST7650 Child / Paediatric tilt table with Independently Locking Castors
ST7651 Child / Paediatric tilt table with Central Locking Castors

- Safe working load and lifting capacity of 250Kg
- Choice of widths available 105cm, 125cm or 150cm
- Choice of manual or electric height elevation on 105cm and 125cm models
- Excellent electric height range from 46cm to 100cm
- Retractable wheel design and adjustable foot for stability on uneven floors
- Purpose made precision bearings on all pivot points
- Clearance beneath frame for mobile hoist
- Hand switch fitted as standard
ST5551 Hydraulic width 105cm
ST5561 Electric width 105cm

ST5551W Hydraulic width 125cm
ST5561W Electric width 125cm

ST5561L Electric width 150cm

• Safe working load and lifting capacity of 240kg
• Choice of Electric or Hydraulic height elevation
• Excellent height range from 41cm to 94cm
• Choice of Retractable wheel design or Central Locking Wheel Design
• Choice of three different sizes - Small (130cm), Medium (152cm) and Large (186cm)
• Purpose made precision bearings on all pivot points
• Clearance beneath frame for mobile hoist
• Hand switch fitted as standard on electric models
• 65cm Wide Upholstery as standard
Large (186cm) Models
ST1551A Hydraulic with retractable wheels
ST1561A Electric with retractable wheels
ST1651A Hydraulic with central locking castors
ST1661A Electric with central locking castors

Medium (152cm) Models
ST1551B Hydraulic with retractable wheels
ST1561B Electric with retractable wheels
ST1651B Hydraulic with central locking castors
ST1661B Electric with central locking castors

Small (130cm) Models
ST1551C Hydraulic with retractable wheels
ST1561C Electric with retractable wheels
ST1651C Hydraulic with central locking castors
ST1661C Hydraulic with central locking castors

The fixed height therapy couch features an extremely strong and rigid design, providing maximum patient comfort throughout all treatment with a safe working load of 240Kg.
The couch has a fully adjustable backrest, that raises from horizontal to +75˚ with gas strut operation.
A paper roll holder, breathing hole and plug for prone treatments, are all available at an additional cost.
There is an adjustable foot for added stability on one of the couch legs.
The couch is supplied flat packed to reduce shipping and delivery costs.
ST2700 2 Section Fixed Height Couch - No Storage
ST2701D 2 Section Fixed Height Couch - 1 Drawer
ST2702D 2 Section Fixed Height Couch - 2 Drawers
